Want to discover how to pick a tubular lock with a ballpoint pen? Cut the tip of the ballpoint pen then remove the ink tube. Make four vertical notches at the back of the pen. Insert the tip of the pen inside the lock and shake until the lock opens.
It is easy picking tubular locks with a bic pen if you have the right tools and you follow the proper procedures. This is useful if you lose or break the key of the tubular lock of your bike. Through this tutorial, you will learn to make a homemade tubular lock pick.
Table of Contents
- What You Need
- How to Pick a Tubular Lock with a Ballpoint Pen
What You Need
You will need the items below to make a tubular lock bypass tool. These items are easy to find. You may have them inside your house. If not, you can purchase at the store that is near you.
You need a ballpoint pen that can fit the tubular lock. The exterior must have the same diameter or it must be smaller than the opening of the lock. The exterior must not be too thick so that it can be moved while it is inside the opening of the lock.
If you don’t have a ballpoint pen that is made of plastic, you can also use a recyclable one. The exterior must be strong enough to stand the force that you will exert but it must also be flexible enough to fit all the pins and open the lock.
A pair of scissors
If you want to cut with ease, you can use a pair of industrial scissors. Compared to other types, these scissors have large blades that reach up to seven inches. They are typically used for cutting thick fabrics and upholstery. This is ideal for those who have arthritis or problems with their hands.
If you don’t have industrial scissors, you can also use standard scissors. These are used for cutting papers, cardboard, and cards. Their handle is made of plastic to make handling and gripping comfortable. Make sure that the pair of scissors you will use is sharp enough to cut the exterior of a ballpoint pen.
How to Pick a Tubular Lock with a Ballpoint Pen
Step 1: Cut the end of the ballpoint pen then remove the ink tube
First, you need to use a pair of scissors to cut the end of the ballpoint pen. Once you are done, you can now remove the ink tube since you will be using the exterior of the pen to open the lock. If you are using a recyclable pen, just take off the cap at the end of the pen and pull out the ink tube from the inside.
Step 2: Make four vertical notches at the back of the pen
The pen must be flexible enough while you are inserting it inside the tubular lock so that you can open the lock easily. To do this, you need to make four vertical notches at the back of the pen. This can be done by using a pair of scissors. Make sure that the notches are placed along the sides of the pen.
Step 3: Insert the tip of the pen inside the lock and shake until the lock opens
To open the lock, insert the pen inside it. Make sure that you place the pen as far as it can go by exerting enough pressure. If the lock prevents the pen from fully sliding in, try to make your notches longer or remove the rust inside the lock.
Once you feel that you have successfully inserted the pen into the lock, hold the pen in one hand and shake the lock with the other. Shake the lock continuously and forcefully until the lock eventually opens. If this doesn’t open the lock after several attempts, you need to call a locksmith.
Are you satisfied with our tutorial on how to pick a tubular lock with a ballpoint pen? By following these steps, picking tubular lock is possible. You don’t have to call a locksmith to help you or buy a replacement key. This tutorial will help you save time and resources. If tried everything and still no success, i recommend you to read this guide to drill out a tubular lock without taking too much time.
If you think that this article is useful, you can share this post with your loved ones. We will also be glad to hear your experiences and thoughts while you are doing the tutorial. Just leave a comment below.
I am the last member to join Revolar and might be just the luckiest to work with dedicated people like Teddy and John. Our team has established a process where my only job is writing the best content to deliver incredible ideas and guides.