Revolar is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Break Ignition Lock with Screwdriver in Seconds?

Fact checked by Teddy B.Miller

how to break ignition lock with screwdriver

Want to know how to break ignition lock with screwdriver? Find the screws that are holding the plastic trim then unscrew them. Once done, remove the plastic trim to have access to the ignition switch. Unlock the steering wheels by removing the bolt mounting on them. Place the screwdriver to the keyhole and turn right.

By following these easy steps, you can remove ignition lock cylinder without key and start your car temporarily. Breaking ignition lock with screwdriver is useful when you need your car for an emergency or you are flat in your budget to call a locksmith.

What You Need

To turn ignition without key, there is a specific item that you will need. You may have it in your toolbox. If not, you can borrow from your neighbors or you can buy it in the store. The item is affordable and easy to find, so you don’t have to worry much about it.

Flathead screwdriver

turn-ignition-without-key

The only item you will need is a flathead screwdriver. Its tip is flat and it is in a wedge shape. This kind of screwdriver is commonly used in loosening and tightening screws that have a straight or linear notch in the screwhead. The size of a flathead screwdriver may vary. It may be small enough to fix eyeglasses to a larger size for industrial works.

The different sizes of a flathead screwdriver are ¼ by 4, 3/16 by 4, ⅛ by 4, 3/16 by 1 1/2, and 3/32 by 1 ½. The first number indicates the width while the second number indicates the length. For this tutorial, you will need a flathead screwdriver that is thin enough to fit the keyhole and long enough to reach the screws.

How to Break Ignition Lock with Screwdriver

remove-ignition-lock-cylinder-without-key

Step 1: Find the screws that are holding the plastic trim in place then unscrew them

The first thing you need to do is to find the screws that are keeping the plastic trim intact. You can locate them in the steering column of your car. Once you have found these screws, you can now unscrew them using the flathead screwdriver. Keep and secure the screws since you will need them if you want to install the ignition lock.

Step 2: Remove the plastic trim to have access to the ignition switch and remove the bolts

Once you have successfully taken off the screws, you can now take off the pieces of plastic trim by just lifting them. You will see the ignition switch after you have cleared away all the pieces.

Now, you have to unlock the steering wheel by removing the bolts attaching the ignition switch and the steering column.

Step 3: Take off the screws holding the electrical and mechanical part of the ignition switch and insert the screwdriver in the keyhole

For the last part, you need to take off the screws that are keeping the electrical and mechanical parts of your ignition switch. The electrical part is the one with the wires.

Once you are finished, you can now insert the screwdriver inside the keyhole. Turn it like the way you will turn the key to your car. This will now ignite your car.

Conclusion

Are you satisfied with our tutorial on how to break ignition lock with screwdriver? With these steps, you can punch an ignition with a screwdriver and start your car for temporary use. This life hack will help you in times of emergency and when you are low in your budget for car repairs.

If you enjoy this tutorial, you can share this post with your friends and loved ones to help them learn ignition lock cylinder removal without key. You can also share with us your thoughts and experiences while you are following the steps. Just leave a comment below.

5/5 - (4 votes)
home-lock-banner