Revolar is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Pick a Jewelry Box Lock? – 4 Simple Methods

Fact checked by Teddy B.Miller

how to pick a jewelry box lock

Having a jewelry box to stash your valuables is one of the main considerations you have to look out for if you want to improve security inside your home. While having your things inside your house is secure enough, you can never be too careful.

However, losing your key to your jewelry box would prove to be a hassle. If you do not have a trusty locksmith in your area, you might want to do lockpicking on your simple jewelry box lock.

In this article, I will show you how to pick a jewelry box lock in different ways and steps:

Ways to Pick a Jewelry Box Lock

Depending on your lockpicking skills and the materials available to you, you might want to choose the appropriate process to open jewelry box without key. Just like how to open wardrobe lock, it might take some time if you do not have the key.

Method 1: Picking a jewelry box with a bobby pin.

open-jewelry-box-without-key

  • Step 1: Prepare two bobby pins and snap them in half by straightening and pulling them out.
  • Step 2: Take the thin end of your bobby pins and insert it into the first lock and another bobby pin on the second one. You should take the bottom ends of the bobby pins that you snapped and insert them between the box’s two teeth on its one side.
  • Step 3: You then have to close the lid in order for you to open it.

Note: depending on the kind of jewelry box you have or the strength of your bobby pins, you might have to do the process from step two again if you cannot successfully open and close it.

  • Step 4: With the remaining bobby pins that you have, insert them into the locks on each side of the box. Then, lift the lid of the box to open it.

Method 2: Picking a jewelry box using a toothpick and a rubber band

with-a-bobby-pin

  • Step 1: Start by poking the lock’s pins with a toothpick, making sure it sits between the lock’s teeth.
  • Step 2: Next, on the tip of your pointing finger, wrap a rubber band around it.
  • Step 3: Once you have put the rubber band, try to close the jewelry box’s lid and tug on it to see if it opens.

Note: if the jewelry box lock does not open, try to place the toothpick in another location until you can open the lid by tugging it.

  • Step 4: Do steps one to three on the other sides of the box until there is enough pressure to make enough space and hold it in place.
  • Step 5: Lastly, with your index wrapped in rubber band again, put force on each outside edge by pulling them until the lock is opened.

Method 3: Picking an old jewelry box lock using a paperclip

with-a-paperclip

  • Step 1: Prepare your paper clip by bending it until the paper clip is stiff and straight. Having your paper clip not bent enough might disable it from going in entirely.
  • Step 2: With a paperclip that is bent, stick the open hook of the paper clip inside any hole of the jewelry box.
  • Step 3: Pull the paper clip back and stop until there is resistance.

Note: if there is no resistance when you pull the paper clip back, you might want to reposition the paper clip and the hook to a hole where there is more resistance.

  • Step 4: Grab another paper clip and bend it again like you did with the first one.
  • Step 5: Insert the hook part of the paper clip to the exterior hole of the opposite side of the first paper clip.
  • Step 6: After making sure both the paper clips sit tight on two sides of the jewelry box, push the ends of the two paper clips to open the box’s lid.

Method 4: Picking a jewelry box using a lockpicking hooks

with-a-toothpick

  • Step 1: Prepare your hook that is suitable for pins or tumblers.
  • Step 2: Insert the hook inside the keyway.
  • Step 3: Set each pin inside the lock by moving the hook up and down and relocating after a pin is set.
  • Step 4: If you have already set the last pin, retrace the pins as some of them might have moved during the process.
  • Step 5: If you feel that all the pins are already set, try lifting the lid of the box.

What is a Jewelry Box Lock and How Does It Work?

A small jewelry box lock and key can store valuables, specifically jewelry. Unlike modern safes, jewelry box locks come with a key and a pin-tumbler or tumbler-based lock.

So how does a jewelry box lock work? Some jewelry boxes are designed with key lock, while some only have a knob.

For jewelry boxes with a circle hole and tumbler-based lock, their locks work by having keys with notches that set the pins inside the lock. Without the key, the pins can be manually set with a picking tool.

For jewelry boxes with knobs, the knobs are utilized to either close or open the lid of the box. If you have a jewelry box with a knob, your jewelry might be easy to open for someone with long fingernails, just like having to open a locked drawer with a knife.

The Importance of Jewelry Box Lock

A jewelry box or a jewelry organizer with lock is something you should invest in, especially when you have the jewelry you want to avoid losing or getting damaged. Rather than displaying it on your vanity table, where it is vulnerable to exterior forces, putting it inside a jewelry box with a lock might be the best idea.

Conclusion

Jewelry boxes should be a must when it comes to securing your valuables. It should also not be forgotten to always lock the jewelry box when you are done using it.

Knowing how to pick a jewelry box lock is a handy skill, especially when you have precious valuables you do not want to lose. So that the next time you lose your keys to your jewelry box, you do not have to worry anymore.

5/5 - (4 votes)
home-lock-banner