Want to know how to open a Kwikset lock with a dead battery? Kwikset keyless entry offers an easier way to unlock your door. However, a dead battery can prevent you from entering your house. You can solve this problem by using a smart key force tool.
Through this tutorial, we will teach you how to open a Kwikset lock despite the dead battery. In just a matter of seconds, you can go inside your house and replace the lock with new batteries.
Table of Contents
How to Unlock a Kwikset Lock Battery Dead No Key?
A Kwikset keypad lock can be opened even though the battery is dead. You only need the right tools to help you out. Some of the devices can be found in your toolbox, or you can purchase them at the nearest hardware store.
- Your regular key or Smart Key Force Tool
A simple tension and pick tool cannot open a Quickset keyless entry device.
You will need your Kwikset key or a smart key force tool to unlock the door. The latter is specifically designed by locksmiths to aid in police operations. However, it is also used to open locks in an emergency due to a lost key or a dead battery.
Purchase a smart key force tool made of hardened steel so that it won’t easily break. A low-quality smart key force tool may break easily after several uses. Also, the tool must fit the keyhole of the lock.
- Vice grips
To hold the force tool appropriately, you will need a vice grip. The size of the vice grip will depend on how large the force tool is. The available sizes of this tool are 9”, 6”, and 4”. The jaw capacities can be 2 ¾”, 2”, and 1 ⅝”.
If you don’t have vice grips, you can use pliers as an alternative. But make sure that you have the right size to turn the force tool and prevent it from slipping quickly.
Step 1: Insert the smart key force tool into the keyhole
If you don’t have a spare key with you, you can use a smart key force tool to open the lock without damaging it. First, you need to check if the smart key force tool fits the keyhole. If yes, insert it into the keyhole until you cannot push it further. Once it is positioned correctly, proceed to the next step.
Step 2: Turn the smart key force tool
Hold the end of the smart key force tool using vice grips or pliers. After you have secured it, slowly turn the device. Keep on applying pressure until you have successfully opened the lock. Once you have unlocked the door, remove the tool. You will be amazed to see the lock damage-free.
Don’t forget to change the batteries with new ones so that you won’t be locked out of your house again. If you want to learn how to pick a Kwikset lock, you can watch this video to help yourself out.
Frequently Asked Questions
How will I know if I need a Kwikset smart lock battery change?
You’ll need a Kwikset smart lock battery change if the LED light on the interior side of the lock starts to blink red. Another indicator is if the keypad flashes a red light. It usually goes on for a week until the battery completely dies.
How can I replace the battery of my Kwikset lock?
First, you have to remove the interior cover. Once you have taken it off, you can put on the 9V battery. Ensure that you secure the battery of the lock in the interior assembly before returning the battery cover.
How long do the batteries of a Kwikset lock last?
For ten entries a day, the batteries of the Kwikset lock can last for 10 to 12 months. You can save battery life by aligning the door properly. If the lock indicates that it is low in battery, change the batteries right away to prevent being locked out of your house.
Also another useful similar tip for you is how to change the battery in the keyless door lock, hope this article can help you in an emergency.
Conclusion
Did you enjoy our tutorial on how to open a Kwikset lock with a dead battery? A Although it is almost impossible to pick a Kwikset smart lock with ordinary picking tools, there are new tools that you can use to unlock it.
If you think this post is useful, we encourage you to share it with your friends. They will be able to open their locks with dead batteries in less than ten seconds. We also love to know how this tutorial helped you. Leave a comment below.
I am the last member to join Revolar and might be just the luckiest to work with dedicated people like Teddy and John. Our team has established a process where my only job is writing the best content to deliver incredible ideas and guides.