Revolar is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Change Code on Brinks Keypad Door Lock? – 7 Steps

Fact checked by Teddy B.Miller

how to change code on brinks keypad door lock

Security is one of the main priorities in order to live in a safe and comfortable home. With home security door locks such as the Brinks Keypad Door Lock, you can make sure that you and your family are nowhere near unwanted intrusion.

However, people might figure out the code of your door lock if either it’s too simple, or they might have seen you enter the code. In this guide, I will show you how to change code on brinks keypad door lock and make your home safer.

Simple Ways to Change Code on Brinks Keypad Door Lock

Before you learn how to reset code on your Brinks keypad door lock, you have to identify first what type of code you want to change. This electronic door lock has two types of codes with different functions — user code and programming code.

Types of Code Brink Keypad Lock Come With

The Brinks security system has a user code, also known as Brinks installer code, which is used to unlock the keypad door lock. The Brinks smart lock can hold up to six user codes which you can delete or change freely.

Brinks programming code is used to either delete or add a user code. For example, in case you want to delete code of one of the users of the Brinks keypad door lock, you are obligated to enter first the programming code to put the lock into programming mode.

How to Change User Code

brinks-digital-deadbolt-manual

Changing the user code involves deleting the code first and replacing it with another one according to the Brinks Digital Deadbolt Manual. To change the user code of your Brinks keypad door lock:

  • Step 1: First, you have to enter the programming code. The programming code might be the default one or the code that you recently changed it into.
  • Step 2: Locate and press the “BRINKS” button on your keypad.
  • Step 3: Press the key labeled “2” and press the “BRINKS” button again.
  • Step 4: Next, you have to enter the user code that will be deleted from the system. Then, press the “BRINKS” button.

You will then know that the user code has been deleted after the Brinks keypad lock beeps once, and the green light blinks.

  • Step 5: To replace the deleted code, you have to enter the programming code again and press the “BRINKS” button.
  • Step 6: On your keypad, press the key labeled “1” and press the “BRINKS” button.
  • Step 7: In this step, you have to enter a new four-to-ten-digit user code and press the “BRINKS” button.

You now have deleted an old user code and added a fresh user code that can unlock the Brinks keypad door lock in tuscan bronze finish.

How to Change Programming Code

By following the Brinks door locks instructions, changing the programming code of your Brinks keypad door lock is simple and easy.

  • Step 1: First, you have to input the existing programming code of your keypad door lock. If you have not changed the code in the past, the default programming code is “0000”.
  • Step 2: Next, locate the “BRINKS” button on the keypad and press it.
  • Step 3: Lastly, you have to enter a fresh programming four-to-ten digit code and press the “BRINKS” button to do a password reset. Note that you have to write down the code in case you forget it.

How to Restore Factory Default Settings on Brinks Electronic Keypad Lock

To perform a restoration on the default settings of your Brinks electronic keypad lock, follow these simple steps:

  • Step 1: Take out the battery cover of the keypad lock and locate the reset button which is labeled “R”.
  • Step 2: Take a paper clip or a pin then insert it into the hole. After inserting, hold it for five second and release it after the your electronic keypad lock beeps three times.
  • Step 3: Your lock has now been reset.

FAQs

brinks-programming-code

How Do Brinks Keypad Door Locks Work?

When you learn to change the code on the Brinks keypad door lock, you also have to know how the door lock works. Instead of a key, the Brinks keypad door lock will require a numerical code that is usually four to ten digits.

Inputting the code requires the user to press the numbers on the numerical pad. This means that the lock will require a battery or small electrical current in order for it to work.

Reasons Why Brinks Door Lock Keep Beeping

Brinks keypad door locks, such as Brinks Keypad Digital Deadbolt 84 Series, beep for certain reasons. Possible causes of this beeping on your Brinks door lock can be attributed to either a battery problem or communication failure.

  • Issue with the battery

This problem will cause your door lock to have a series of beeps and flashing red on the “BRINKS” button, signifying the user about the conditions of the batteries that are needed to be replaced. Troubleshooting this problem requires you to have four AA alkaline batteries.

  • Communication failure

A communication failure might be caused by an outage of a cell or power provider, disconnection of a plug from the power source, interference in the signal, or malfunction of the door lock’s system.

Once you have fixed the issues, your Brinks keypad door lock will go back to normal.

Is Brinks Keypad Door Lock to Pick?

Brinks keypad door locks, such as Brink’s Electronic Deadbolt 2685 150, are proven to be difficult to be unlocked through picklocking. Needless to say, this will also expose your security system.

However, with the right tools such as a tension wrench, you might get the lockpicking job done. You would also need to have the proper skill to lockpick as the interior of the Brinks keypad door lock differs from other door locks.

How to Perform Door Handing Detection?

The door handing detection function should be done when you get a new Brinks electronic lock. Without this process, your door lock would not work electronically.

To perform the door handing detection, enter “0000” or the default programming code and press the “BRINKS” button. Next, press the “0” key and bress the “BRINKS” button.

The lock will flash green twice and beep. This signifies that the door handing detection is completed and the lock can now be utilized.

Conclusion

Learning how to change code on Brinks keypad door lock is a walk in the park. Follow the instructions set in this article and you are good to go.

With the Brinks keypad door lock, you are a step ahead from unwanted danger. Changing the code on your Brinks keypad door lock will ensure you a safe and reassuring home for you and your family!

5/5 - (2 votes)
home-lock-banner